ATEK MAKINA JUMBO DOUBLE, Инструкция пользователя

Страница: 12 / 18

12
ROUTINE MAINTENANCE
To gurantee the efficiency of the machine and for its correct functioning is
essential to carry out routine cleaning and maintenance.
Routine maint
enance must be carried out by the user according to the maker’s instruction.
** Before starting any cleaning or maintenance switch off the main switch and remove the mains plug from socket.
EVERY DAY...
Clean and grease the flansh and the lathe.
EVERY MONTH...
Check the oil level of the hydraulic system.
Tight the screws of the lathe unit.
EVERY 6 MONTHS...
Grease the bearings.Make a general check.
EVERY YEAR...
General Check:
Visual inspection of all structural parts and mechanisms to qurantee that there are no problems or
anomailes.
Electric Plant: Skilled electricians should test the electric plant.
STORAGE
PERIODS OF INACTIVITY PERMANENT STORAGE
During the times the machine is temporarily stored
or whenever the machine is not in use,remove the plug
from the mains.
If it is decided to store the machine long term it is
advisable to make it inoperative by removing the mains
cable after having unplugged it from the mains.
TECHNICAL ASSISTANCE AND SPARE
PARTS

THE MACHINE IS GURANTEED (1 YEARS)

FOR ANY MACHINE MAFUNCTIONS CONSULT THE SECTION “MALFUCTIONS: CAUSES AND POSSIBLE REMEDIES” . ANY
OTHER MALFUNCTIONS MUST BE CHECKED BY PROFESSIONALLY QUALIFIED PERSONNEL.

IN ALL CASES CONTACT THE ASSISTANCE SERVICE OF HATCO. FOR PROMPT ASSISTANCE IT IS IMPORTANT AT THE
TIME OF THE CALL TO SPECIFY THE MACHINE MODEL, THE PRODUCTION NO. (FOUND ON THE REGISTRATION
PLATE) AND TYPE OF MALFUNCTION
WARNING
ANY WORK ON THE ELECTRICAL, HYDRAULIC AND PNEUMATIC SYSTEMS MUST BE
CARRIED OUT ONLY BY PROFESSIONALLY QUALIFIED PERSONNEL.

***THE MOTORS ARE NOT UNDER WARRANTY.

THERE IS NO OIL IN THE HYDRAULIC

The machine is provided without oil in the hyraulic unit.Put some oil till the level to the
hyraulic unit from the oil can that you can find in your accessories box provided with
your machine.

Use only SHELL TELLUS 37 in the hydraulic unit

Run the machine idle for 10 minutes during the winter months. Start work later please.
WARNINGS
USE ONLY ORIGINAL PARTS OF THIS MACHINE
THE MANUFACTURER TAKES NO RESPONSIBILITY OF THE NONORIGINAL PARTS
TO ORDER SPARE PARTS :

INDICATE THE SERIAL NUMBER OF THE MACHINE AND THE YEAR BUILT.

INDICATE THE CODE OF THE PIECE REQUESTED.

INDICATE THE QUANTITIY REQUIRED.
CLAUSE 11
CLAUSE 12