DSP Components
419
© 2017, ATEÏS, member of PAX ProAV Group
Dead Zone:
If the sensing microphone doesn't
detect more noise than during the
calibration process, the A.N.G. will
be in [Dead Zone]. See the picture
on the right.
Note:
When using the A.N.G components,
the max. number of ANM unit which
connects to IDA8 depends on the
[DSP Power]. See the picture on the
right.
It requires additional audio input
board due to that there has only one
audio input for each PDC port.
5.2.3
Compressor/Compressor Stereo
The Compressor allows to decrease the level which with louder sound dynamically while quiet sounds
remain untreated. In this way, the quiet sounds are more audible without the loud sounds are being too
loud, this improves the audibility of audio in noisy environments. Compressor Stereo component is the
same as the Compressor component, but works on both stereo output channels.
