Star t-up-----------------------------------------------------------------------------
Sand Filter need to clean itself after loading the sands. Methods as
bellow:
1. Make sure the valve to “ Backwash”
2. Turn on the valve of the suction pipe of swimming pool, turn on the
pump, and R un for 4 minutes.
3. Turn off the pump, and turn the valve to “R inse” , and turn on the
pump for 1 minute . Then turn off the pump , to turn the valve to the
“Filter”
After the that, the filters can apply in swimming pool water recycle
filtration.
Notice: It must turn off the pump when you turn of the valve
position .
M aintiance--------------------------------------------------------------------------
Forbid to clean the filter cover with any chemical solvent. Otherwise, It
will damage filter performance.
R eplace the accessories which it is broken.
Please make a necessary sand backwash depending on the instruction.
And suggest to replace the sand each 2-3year just depend on your water
quality.
-9-
atecpool.com
