ATECH PEGASUS-06 P, Руководство пользователя

Страница: 3 / 10

2
1. GENERAL INFORMATION
1.1. Introduction
The user’s manual given by the manufacturer contains information about the machine parts. Each machine operator
should read these ınstructions carefully, and the machine should be operated after fully understanding them.
Safe and efficient use of the machine for long term depends on understanding and following the instructions contained
in this manual. The technical dtawings and details contained in this manual constitute a guide for the operator.
1.2.
Information About The Distributor
ATech Machine, Inc.
ATechMachinery.com
Ph.
: +1-240-505-1967
E-mail : info@ATechMachinery.com
*In case of any technical problem please contact your nearest ATECH dealer or ATECH head office through the above
mentioned phone, fax or e-mail address.
*Technical labels with the model description of the machine are fixed onto the front side of each machine.
*The machine’s serial number and manufacturing year are stipulated on the technical label.
2.
MACHINE’S DESCRIPTION AND TECHNICAL FEATURES
2.1. Machine’s Description
Portable miter saw for cutting of PVC, aluminum and wooden profiles in desired angles. The operator has the possibilty
to adjust the cutting speed of the saw blade via knob according to material type and size.
 Cutting at fixed angles of 15˚ – 22,5˚ – 30˚ – 45˚ – 90˚ and at intermediate angles via fixing arm.

Machine has been designed according to CE Safety Directives.

PEGASUS-06 P – SKAT-06 P : Portable manual system.

Gas shock absorber system.

Backstroke absorbing stop system.

User friendly clamps. Can be tilted in the desired direction, you can tighten with a single movement.
STANDARD ACCESSORIES
 Ø350mm (14”) Carbide tipped saw blade (Pegasus)

Ø400mm (16”) Carbide tipped saw blade (Skat)

Twin manual clamps
OPTIONAL ACCESSORIES
 Infeed & outfeed table

Mechanical spring system
Please mention the below mentioned data in all your correspondence regarding the machine with the manufacturer
and/or your ATECH dealer.

Machine model
 Machine’s serial number

Voltage and frequency

Name of dealer where machine was purchased
 Date of purchase

Description of the machine fault
 Average daily operation period
2.2. Technical Features