7. Open the oil drain / deaeration unit plug in the shape of the photo.
8. Press gently on the top of the oil discharge unit with a flat, blunt metal (for example 3 allen).
a. Foamy oil will come in the first place during the press.
b. Continue this process slowly until the unfoamed oil comes.
9. When the oil is froth free stop the process and wipe with a dry cloth. Replace the hydro-pneumatic cylinder.
10.2.2. Oil Completion Method
There is a possibility of a handicap after the air reception process. That's the output height of the saw.
Since the amount of oil in the system is reduced, the output distance of the saw can be reduced. Here's what
you need to do to get your saw to reach the maximum height again. Oil pressing tool is necessary operation for
oil pressing. However, if you do not have the necessary oil-press tool, you can also do the following
.
1. Follow the same steps until the first 6 items of hydro-pneumatic cylinder air reception.
2. Remove the oil filler unit.
3. Add "HYDRO OIL HD 46" or equivalent oil to the system and close the oil filling unit.
4. Repeat steps 7 and 8 of the hydro-pneumatic cylinder air reception method to get any air that may form in
the system.
3.
SPRAY MIST SYSTEM MAINTENANCE
3.1.
The front cover of the machine will be opened and the drum at the bottom will be taken out.
3.2.
The cooling oil prepared by opening the drum cover will be put into the drum provided that it is not filled
completely (The oil to be used should be close to the water flow, the system is not suitable for throwing
thick oil).
3.3.
Make sure that the hose on the cover is fully inserted into the canister and on the filter.
3.4.
The cover will be tightly closed and the hose will be placed inside the machine, taking care not to break
it.
19
