Atech Flash Technology PRO-9, Руководство пользователя

Страница: 15 / 18

Hardware Setup
12
Please note that your motherboard USB header pin
assignment could be different from the example above. If you
need to reassign wires on Internal USB cable, please follow
the procedure below:
(1) Determine which wires you need to remove from the
black pin connectors first by referring to your motherboard
USB header pin layout.
(2) Use a needle or push pin to flip up the tiny plastic tab and
pull the wire out from the connector. Please take caution on
this step as excessive force on flipping the tab may cause
the tab to break.
(3) Repeat above step for each wire that requires changing.
(4) Insert the wire pin back into the correct slot and press the
tiny plastic tab down will hold the wire in its position.