Atec A580TM, Руководство по установке

Страница: 5 / 12

5
Step 2: Install the cable cover
Route the cables as required. Snap the cable cover into place on
the rods (Fig. 2a), and then slide the cover into position as required
(Fig. 2b).
Slide down
Fig. 2a
Fig. 2b
Fig. 1a
Fig. 1b
A-H
I
M
If your television has a curved back and mounting
holes are recessed (Fig 1a)
spacers are required.
Install the spacers (M) between the display and
the bracket as shown in Fig 1b. Then, use the
appropriately selected bolts (A-H) applicable to your
TV and the square washers (I) to install the brack-
ets with spacers to the back of the television. Make
sure that the two brackets are equal in height and
are level. Once the brackets are aligned, securely
tighten the bolts (Fig 1b) If neccessary, use addi-
tional washers (N,O) to make sure the Bolts (A-H)
keep the brackets snug to the rear of the TV without
over tightening.