10
1. The Handles on the front of the Wall Plate mount arm are used to adjust the tilt angle
of the TV to your desired angle.
2. These handles are tension levers. To loosen the tilt adjustment, turn the handle
counter clock-wise until the handle hits the connecting plate and can turn no more.
Then pull the handle away from the mount arm to release the spring as shown in Fig. 5b,
and while holding the handle away from the mount arm, turn the handle clockwise and
release the handle to again engage the spring. Now you can turn the handle further counter
clockwise to loosen the tilt adjustment more.
3. Loosen the other handle slightly and adjust the tilt to your liking and tighten both handles.
4. To tighten these spring loaded handles and lock in the tilt, turn the handles clockwise and
when the handles can turn no further, pull each handle away from the mount arm and then
turn the handle counter clockwise and release. Now you can tighten handle further to lock
in the tilt.
Step 5. Adjusting the Tilt
Fig. 5b
-15
5
90
5
+
Handle
