TH-3060-UFL Page 2 of 4
Top Cap
Top Cap
SLIDE
SLIDE
1.
Changing position of Arm on Wall Mount
Use Phillips head screw driver
to loosen and tighten.
Use 5mm Allen Key to
loosen and tighten.
Four optional positions
2.
Install Arm/Wall Mount to the Wall
Coach Screw
Washer
End Cap
Screw
Nylon Anchor
Drilled Hole
End Cap
WALL
Coach Screw
Washer
End Cap
Screw
Drilled Hole
End Cap
WALL
2.1
Masonry Wall
3.
Attach Top Caps to the installed Arm/Wall Mount
Drill four 10mm (0.39”) diameter holes, 58mm (2.3”) deep.
Secure the mounting plate to the wall using the Coach.
Screws and Nylon Anchors supplied.
Drill four 5mm (0.2”) diameter holes, 58mm (2.3”) deep.
Secure the mounting plate to the wall using the Coach
Screws supplied.
Note:
Use a stud finder to accurately locate the centre
of the stud. Ensure that all screws fix securely into stud.
2.2
Timber Stud Wall
