AWMS-2-BT75-FS Page 3 of 4
5.
Mount Bottom Display
75mm
100mm
75mm
100mm
NOTE
For 75mm VESA
unscrew 5mm to
access top holes
E
L
TOP
4.2
Attach VESA Plate
with M4x10 screws.
OR
For recessed VESA use 10mm
Spacers and M4x20 screws.
4.1
VESA mount compatibility
5.1
Set VESA plate to
open
position.
Bottom Display must be
mounted on bracket first.
Use two people for wide or
heavy display.
4.
Attach VESA Plates to Displays
E
M
N
OPEN
5.2
Lift display until Vesa Plate
is above the Bracket.
5.3
Centre VESA close to post
and slowly lower until bar on
VESA Plate sits in saddle in
bracket.
WARNING
Do not loosen
hand knob once
display mounted.�
CLOSED
5.4
Set VESA Plate to
closed
position by sliding clips on
both sides inwards
5.5
Adjust Display tilt angle by
gripping edges of screen and
rolling up or down to desired
position. .
5.6
Set Display angle by
tightening Tilt Knobs.
OPEN
TILT KNOBS
