AD-TVC-75 Page 4 of 4
No portion of this document or any artwork contained herein should be reproduced in any way without
the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer
reserves the right to alter specifications without notice. ©20210915
9.
Adjust display height
9.1 Two people are required to change display height.
Display
must
be removed prior to adjusting height.
9.2 Person “A” holds the top
section of the telescopic column.
Person “B” unscrews 2x safety
screws from left and right poles by
using 6mm Allen key. Put screws
aside. Carefully depress both
spring buttons on poles by using
thumbs, so that person “A” can
move top of column down or up to
desired height.
9.3 When height is determined,
let spring buttons set into plunger
holes. Ensure both spring buttons
have popped out. Secure 2x safety
screws.
E2
Spring button
Safety screw
8.
Cable routing options
8.1 Cables may be routed down the
inside or outside of column
M
L
Note: Grommets
must
be
inserted into tube prior to
inserting cables
Maintenance
• Tighten fasteners and check the cart is secure and safe to use
at regular intervals (at least every three months.)
• Please contact your distributor if you have any questions.
Caution: These parts
must
be attached to prevent accidental
dislodgement of screen.
Note: Centre display after hooking it
over mounting bracket
7.2
7.
Mount display
7.1
