AF-AT-NBC Page 2 of 4
1.
Desk overview
The desk clamp bracket
can be repositioned to
suit different mounting
surface thicknesses.
1.1
Default
1.2
Inverted
2.
How to reconfigure desk clamp
2.1
Remove screws
(M8 x 16mm Countersunk screw)
2.2
Remove clamp plate
2.3
Invert bracket
2.4
Replace clamp plate
2.5
Reattach bracket
Pressure
Plate
M10 Desk
Clamp Screw
5mm Allen
Key
M8 x 30mm
Countersunk
screw
Tighten
firmly
3.2
Place in desired location
3.3
Screw pressure plates
in and
tighten firmly
.
Drill 9mm hole in desired post
position on work surface.
3.1
Attach clamp to post
3.
Post mount configuration
4.
Bolt through
9mm
(3/8”)
25mm
offset
MIN THICKNESS
- 0mm (0”)
MAX THICKNESS
- 39mm (1.5”)
MIN THICKNESS
- 35mm (1.4”)
MAX THICKNESS
- 76mm (3”)
5.
Installing bolt through
5.1
Attach plate to post
Align rear hole with
hole on desk
5mm
Allen key
M8x60mm
Screw
Bolt
through
plate
6.
Install VESA monitor head
Optional
Spacers
(may be required
for recessed and
uneven surfaces)
VESA monitor
head
Screen
M4x10/12/16mm
Phillips head
mounting screws
6.1
Install VESA monitor head as shown.
100mm
100mm
