AF-AA Page 3 of 4
4.1
Unlock Handgrip ensuring both the
screen and arm assembly are supported
4.2
Lift/Lower the Screen to the desired
height. Move both Screen and Arm
assembly together
4.3
Lock Handgrip firmly
4.
Adjusting Height
5.
Cable Management
3.
Mounting Monitor
VESA monitor head
Arm Assembly
3.2
OPTIONAL SECURITY SCREW
Ensure the Monitor is supported, then loosen the Monitor head
screw with the 5mm Allen Key and tilt screen up before installing
the M4 x 16mm Security Screw into the Security Screw hole
Note:
Support Screen
when adjusting tilt.
3.1
Insert VESA monitor head into
the receptacle in the Arm Assembly
5mm Allen Key
Phillips Head
Screwdriver
Loosen
Tighten
Security Screw
Hole
M4 x 16mm
Security Screw
Monitor head
screw
Lock Slot
Elbow Joint
‘click’
‘click’
Lock Slot
Elbow Joint
‘click’
‘click’
5.1
After plugging in your cables,
install the Cable Covers.
Insert Cable Covers
up into Lock Slots.
5.2
Push Cable Covers away from
Elbow Joint to secure in place.
5.3
Cable Clips and Cable Stops can be installed
to further manage cables.
Cable Stop
Cable Clip
Note: Ensure enough cable
slack is given to allow for
movement.
