Connec
ƟŶg
Your
Inverter
1.
Make sure the ON/OFF rocker switch located on the front panel of the inverter is in the OFF (0) posi
Ɵ
on.
2.
Remove your cig
ĂƌĞƩ
e lighter and push the 12-Volt
power
plug
Į
rmly into the 12V DC receptacle in your
vehicle.
3.
Turn the inverter rocker switch to the ON posi
Ɵ
on. The GREEN LED Indicator light should glow, con
Į
rming
that there is power running to the inverter.
4.
Con
Į
rm that the appliance to be operated is turned OFF. Turn the inverter rocker switch to the OFF
posi
Ɵ
on. Plug the appliance into the AC receptacle on the front panel of the inverter.
5.
Turn the inverter rocker switch to the ON posi
Ɵ
on. Turn the equipment or appliance on.
Note
x
Use of an extension cord from the inverter to the appliance or equipment being operated will not
sign
ŝĮĐ
antly decrease the power being generated by the inverter. For best opera
Ɵ
ng results, the extension
cord should be no more than 50 feet long.
x
If the green LED blinks when you
Į
rst turn the inverter ON, this indicates that there is a short circuit within
the power supply. Turn the inverter OFF. Remove the 12-Volt
plug from the cigar
ĞƩ
e lighter socket,
Į
rmly
reinsert the plug, and then turn the inverter ON again. If this does not remedy the problem try using a
di
ī
erent 12-Volt
power
source.
12V DC Input Cable
ĺ
Ĺ
Ļ
ķ
ĸ
Ľ
ļ
Alligator Clip Cable
ķ
n
a
f
g
n
i
l
o
o
C
ts
e
l
t
u
o
C
A
h
c
t
i
w
S
F
F
O
/
N
O
ts
r
o
p
B
S
U
External fuses
DC input “+” terminal (red)
DC input “-” terminal (black)
Ļ
ļ
Ľ
ĸ
Ĺ
ĺ
Power indicator (green)
Connect the red terminal of the 12V DC input cable to the “+” terminal an
ĚƟŐŚƚĞŶƚŚĞůƵŐ͘
Connect the black
terminal of the 12V DC input cable to the “-” terminal an
ĚƟŐŚƚĞŶƚŚĞůƵŐ͘
DO NOT REVERSE THESE WIRES!
When using the inverte
ƌŽƵƚƐŝĚĞŽĨƚŚĞĐĂƌ͕ƵƐĞƚŚĞĂůůŝŐĂƚŽƌĐůŝƉĐĂďůĞƐŚŽŽŬĞĚĚŝƌĞĐƚůLJƚŽƚŚĞĐĂƌ͛ƐďĂƩĞƌLJ͘dŚĞLJ
6.
are to be connected the same way the 12V DC input cable is installed in step 2.
7