Operation
AC Voltage Measurement:
I. Set the rotary switch to V position.
$POOFDUUIFCMBDLUFTUMFBEUP$0.UFSNJOBMBOEUIFSFEUFTUMFBEUP7Ȱ)[UFSNJOBM
5PVDIUIFQSPCFTUPUIFUFTUQPJOUTBOEXIJMFSFBEJOHUIFEJTQMBZBUUIFTBNFUJNFZPVDBOQSFTT)[%65:
CVUUPOUPPCUBJOUIFTJHOBMGSFRVFODZBOEEVUZPGWPMUBHFNFBTVSFE
DC Voltage Measurement
I. Set the rotary switch to V position.
$POOFDUUIFCMBDLUFTUMFBEUP$0.UFSNJOBMBOEUIFSFEUFTUMFBEUP7Ȱ)[UFSNJOBM
5PVDIUIFQSPCFTUPUIFUFTUQPJOUTBOEXIJMFSFBEJOHUIFEJTQMBZBUUIFTBNFUJNFZPVDBOQSFTT)[%65:
CVUUPOUPPCUBJOUIFTJHOBMGSFRVFODZBOEEVUZPGWPMUBHFNFBTVSFE
AC / DC Current Measurement
To avoid injury or damage to the meter if the fuse blows, never attempt an in-circuit current measurement
where the open-circuit potential to earth is greater than 600V. To avoid damage to the meter, check the meter's
fuses before proceeding. Use the proper terminals, function, and range for your measurement. Never place
the probes in parallel with a circuit or component when the leads are plugged into the current terminals.
5VSOPòQPXFSUPUIFDJSDVJU%JTDIBSHFBMMIJHIWPMUBHFDBQBDJUPST
4FUUIFSPUBSZTXJUDIUP"N"PS"QPTJUJPO
1SFTT4&-&$5 ZFMMPXUPTFMFDU"$PS%$NPEF
$POOFDUUIFCMBDLUFTUMFBEUP$0.UFSNJOBMBOEUIFSFEUFTUMFBEUPN"PS"UFSNJOBM
5PVDIUIFQSPCFTUPUIFUFTUQPJOUTUVSOPOUPUIFDJSDVJUBOESFBEUIFEJTQMBZBUTBNFUJNFZPVDBOQSFTT
)[%65:CVUUPOUPPCUBJOUIFTJHOBMGSFRVFODZBOEEVUZPGDVSSFOUNFBTVSFE
WARNING
Resistance Measurement
:
To avoid electrical shock or damage to your meter, if the resistance being measured is connected to a circuit,
turn off power and discharge all capacitors before measurement.
.
$POOFDUUIFCMBDLUFTUMFBEUP$0.UFSNJOBMBOEUIFSFEUFTUMFBEUP7Ȱ)[UFSNJOBM
Set rotary switch to desired Ω position.
3. Connect test leads to circuit being measured and read resistance value on digital display.
WARNING
