•
Technical Data
Square drive………………………………………………………………………1/2” (13MM)
Free speed…………………………………………………………………………7,500 RPM
Max torque…………………………………………………………………………420 FT-LB
Avg. air consumption…………………………………………….………………..5 CFM
Operating pressure…………………………………………………………….…90 PSI
Air inlet ………………………………………………………………………….…1/4” NPT
Weight……………………………………………………………………………...5.70 LBS
Sound pressure level……………………………………………………………. 91.6 dB(A)
Sound power level………………………………………………………………..102.6 dB(A)
Vibration in the handle……………………………………………….…….……..4.35 M/S
2
•
Important Safety Rules
1. Only use impact sockets which are specifically designed for use with an impact wrench.
2. Prolonged exposure to vibration may cause injury.
3. Read all instructions before using this tool. All operators must be fully trained in its use and aware of these safety
rules.
4.
DO NOT
exceed the maximum working air pressure.
5. Use personal protection equipment as recommended.
6. Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains
chemicals known to cause cancer, birth defects and other reproductive harm.
7. Use only compressed air at the recommended conditions.
8. If the tool appears to malfunction, remove from use immediately and arrange for service and repair. If it is not
practical to remove tool from service, then shut off the air supply to the tool and write or have written a warning note
and attach it to the tool.
9. If tool is to be used with a balancer or other suspension device, ensure that the tool is firmly attached to the
suspension/support device.
10. When operating the tool, always keep the body and particularly the hands away from the working attachment fixed
to the tool.
11. The tool is not electrically insulated. Never use the tool if there is any chance of coming into contact with live
electricity.