R3(S) IP Phone User Manual
ATCOM TECHNOLOGY CO., LIMITED
www.atcom.cn
15
Dial pad
Entering numbers or characters.
Memory Keys
All the memory keys can be defined as BLF key, intercom,
DTMF etc. Long hold the programmable key will enter the
editor interface if the programmable key has been already
defined as the BLF/Speeddial/Intercom/Key event as pick
up, call park, DTMF etc. Short hold the programmable key
will enter the editor interface immediately if the
programmable has not been defined.
Navigation keys
Allow users to navigate(left, right, up, down). Press
can enter “Directory”. Press
can enter “History”.
Confirm users’ operation and show status when R3 is idle.
Cancel users’ operation.
Enter menu settings.
Adjust the volume (speaker/handset/headset/ring).
Volume level will be displayed on LCD when pressing
volume key.
Pick up and hung up under the speaker mode.
Mute the mic in a conversation by pressing the Mute
button; this prevents the person on the active call from
hearing what you or someone else in the room is saying.
If the call is muted, the mute LED is lighted in red.
To un-mute, press the Mute button again.
Pick up and hung up under headset mode. The LED button
will be lighted when talking in headset mode.
Check the Voicemail status. The LED button will be lighted
when there is a new message. Long hold will enter the
editor interface to configure the voicemail number.
Hold the current call.
Redial the last dialed number.
