www.atcom.cn
8
5.
Please run misdn-init start
[root@localhost etc]# misdn-init start
The correct output will like the following:
-----------------------------------------
Loading module(s) for your misdn-cards:
-----------------------------------------
/sbin/modprobe --ignore-install hfcmulti type=0x1 protocol=0x2 layermask=0xf poll=128
debug=0
/sbin/modprobe mISDN_dsp debug=0x0 options=0 poll=128 dtmfthreshold=100
6.
To check if the driver of AX-1E is loaded successfully, please run cat /proc/interrupts, getting
one line with HFC-multi, and the number of interrupt increases after running cat
/proc/interrupts again, it proves that the driver of AX-1E is loaded successfully.
50: 2749 2269 0 354 IO-APIC-level uhci_hcd:usb4, HFC-multi
7.
Please start asterisk
asterisk –vvvvvvgc
reload
8.
Please run command misdn show stacks
the correct output will like the follow:
*CLI> misdn show stacks
BEGIN STACK_LIST:
* Port 1 Type TE Prot. PTP L2Link DOWN L1Link: DOWN Blocked:0 Debug:0
If the port is connected to E1 cable correctly, the correct output will like the following:
*CLI> misdn show stacks
BEGIN STACK_LIST:
* Port 1 Type TE Prot. PTP L2Link UP L1Link: UP Blocked:0 Debug:0