AT-610P User Manual
ATCOM TECHNOLOGY CO., LIMITED
11
、
Installation
Use Ethernet cable to connect AT-610P’s LAN port and your computer. Set
computer’s IP to the network 192.168.10.x or using dynamic obtain IP. Open
web browser and key in 192.168.10.1. Then user will see the logon page of
AT-610P, the default username and password is admin/admin for administrator
and guest/guest for guest.
Set up page for VoIP user only:
2nd
、
Feet installation instruction
1
、
Desktop position:
A
、
Put the bottom side of the IP phone upside and press the plate with letter
“
PUSH
”
into
the slot, please refer the picture as below:
