APBX IP01 User Manual
26
ATCOM TECHNOLOGY CO., LIMITED
Outbound Trunk Selection
Select trunks which calls are forwarded out through. In my case, the call will be forwarded out via analog trunk FXO1.
5.3
Make inbound calls
Go to
PBX Settings
->
Inbound Routes
, click
to add an inbound route. Just setting Selected Trunks and
Path is OK.
Caller ID
Define the Caller ID number to be matched on incoming calls. Leave this field blank to match any or no CID info.
Special characters described in chapter 5.2 can be used here as same.
DID number
Just leave it blank.
Extension
It’s unavailable for Analog trunk, leave it blank.
Inbound Trunk Selection
Select the trunks for which this inbound route apply.
Time
