ATCOM AG-198, Руководство пользователя

Страница: 23 / 40

AG-188 User Manual
23 / 40
2.4.9 2.4.9 2.4.9 2.4.9 Firewall Firewall Firewall Firewall
� In_access Enable: Select it to Enable in_ access rule.
� Out_access enable: Select it to Enable out_ access rule.
� Firewall Input Rule Table: Firewall input rule
� Firewall Output Rule Table: Firewall output rule
� Input/output: Specify current adding rule by selecting input rule or output rule.
� Deny/Permit: Specify current adding rule by selecting Deny rule or Permit rule.
� Protocol Type: Filter protocol type. You can select TCP, UDP, ICMP, or IP.
� Port Range: Set the filter Port range.
� Src Addr: Set source address. It can be single IP address, network address, complete
address 0.0.0.0, or network address similar to *.*.*.0.
� Dest Addr: Set the destination address. It can be IP address, network address,
complete address 0.0.0.0, or network address similar to *.*.*.*.
�
Src Mask: Set the source address’ mask. For example, 255.255.255.255 means just
point to one host; 255.255.255.0 means point to a network which network ID is C
type.
�
Des Mask :::: Set the destination address’ mask. For example, 255.255.255.255 means
just point to one host; if set to 255.255.255.0 means point to a network which network
ID is C type.