User Manual
GPRS Solutions for Serial Connections
Copyright
©
2013 SHENZHEN ATC TECHNOLOGY CO., LTD.
10
Restore to factory settings.
u
Clear
Clear the information of the software.
u
Read
Get the parameters of the DTU.
u
Set
Write the parameter into the DTU.
u
Restart
Reboot the DTU.
3.4
SMS commands
u
CFG:Sleep
Send this command to make DTU into sleep mode.Before into sleep mode the DTU will send a message
back to the mobile phone which send the message.
u
CFG:Wake
Send this command to make DTU wake up. After wake up the DTU will send a message back to the
mobile phone which send the message.
u
CFG:Restart
Reboot the DTU.
u
CFG:
Send this message to check the parameters of the DTU. The DTU will send a message back to your phone.
u
CFG:IP="xxxxxxxxx",PORT="xxxxx",MODE="xxx",IPBak="xxxxxxxxx",PORTBak="xxxxx",Phone1="
xxxxxxx",Phone2="xxxxxxxxxx"
Send this message to configure the DTU. This message can be used to modify the address of the server,
port, protocol. Those parameters here are just an example.
