manualshive.com logo in svg

ATC SCS70 Pro, Руководство пользователя, Страница: 8 / 14

Поделиться
Скачать
ATC SCS70 Pro Скачать руководство пользователя страница 8

Indicates a temporary or permanent amplifier fault. The Fault 

LED

 will illuminate if there is a 

DC

 fault on the amplifier or if the thermal limit of the 

heatsink is reached. In the rare case that the Fault 

LED

 illuminates, the subwoofer should be switched off. Ensure the subwoofer heatsink has 

adequate ventilation and after 

45

 minutes switch it back on. If the Fault 

LED

 remains illuminated the amplifier is registering a fault which should be 

investigated by an approved technician. Please contact your 

ATC

 dealer or distributor, details can be found at www.atc.audio. If the Fault 

LED

 is no 

longer illuminated, the amplifier had shut down safely due to reaching high temperatures. Please reduce the system listening level, subwoofer Level 

or improve amplifier ventilation and continue to use the subwoofer.

 

Indicates operational state. The Studio Control Subwoofer has two 

LED

’s mounted in the front facing badge (Diagram 6). 

The 

LED

 to the left is a Bi-Colour Green/Red 

LED

. When Green the subwoofer is powered ON, when Red, the subwoofer amplifier is limiting, 

please reduce the listening level. Persistent and/or continuously illumination of the Red 

LED

 can result in damage to the amplifier or driver.

The 

LED

 to the right is not lit when the subwoofer is operational and will illuminate Blue when the subwoofer is Muted via an external footswitch, 

see Section 5.6.

 

SECTION FIVE

   DIA

G

R

A

M

 6

F a u l t

F r o n t   P a n e l   D i s p l a y

5.7

5.8

POWER / LIMIT

MUTE

ACOUSTIC ENGINEERS

PROFESSIONAL 

SERIES 

SUBWOOFER

MADE IN ENGLAND

Acoustic Transducer Co. Is a trading name and

Is the registered Trade Mark of Loudspeaker Technology Ltd.

R

STUDIO SUB BADGE ARTWORK revA

04-12-20

PANEL ANODISED BLACK. TEXT AND LOGO 

TO APPEAR OFF WHITE AS SAMPLED.

LASER ETCHING SHOWN ABOVE IN 

BLACK.

DOTTED LINES DENOTE PANEL EXTENTS, 

DO NOT PRINT.

REVISION NOTES:

04-12-20 - revA- NEW PART NUMBER, NO 

CHANGES. WAS “SCS70 BADGE revC”

90.00 mm

Содержание SCS70 Pro















Отзывы:

Нет отзывов