Specification
Voltage 230v ~ 50Hz
Motor
Brush Motor
Phase
1Φ
Sensor Range
15-20cm
Load
1
15
0
W
IP Class
IPX1
Air Speed
6
5
m/s
Size (mm) 2
80
x
1
53
x1
6
2
Heat level
6
50w
-750w
Nett Weight
3
.
2
kg
Features
•
Infra-Red operated Hygienic High Speed hand dryer
•
Solid Stainless Steel
or Cast Aluminium Cover
•
Auto stop Function after 40s to prevent overrun
Product
Description
Circuit
D
iagram
Environmental
Protection
♻
Waste electrical products should not be disposed
of with household waste, please recycle this
product where the facilities exist.
Please check with your local authority
Warranty
ATC Electrical &Mechanical provides a
12 months
limited
parts warranty for the
Z-2
651M/BL
as long as the following
conditions are followed:
Installation and use of the hand dryer is in accordance with the
instruction manual, which is packed with hand dryer.
In order to arrange service for the hand dryer the following
information is required.
Receipt number:
____________________________________________
Date of Manufacture:
__________________________________________
Date of Purchase:
__________________________________________
Precautions
before
installation
Do not install in the following locations; Installation in these
areas can cause the unit to malfunction
•
Areas with Temperatures below 0
o
C or above 40
o
C
•
In direct Sunlight or areas above reflective surfaces
•
Areas where the unit can come into direct contact with
water
•
Above counters or sinks
•
Areas of High moisture and Humidity levels
•
Locations containing Corrosive or Oxidizing gasses
•
Areas at Altitude above 2000m
Installation
Location
•
The Chart below shows the recommended mounting
height for the Hand Dryer.
•
Make sure the dryer is mounted more than 150mm away
from walls on either side of the dryer.
•
Ensure the wall the hand dryer is mounted on is flat and
smooth.
•
Do not mount the unit behind doors where the opening of
the door may damage the dryer
•
Do not install the dryer with the power connected; the
dryer must be connected by a qualified electrician when
being installed.
The power cord Supplying the hand dryer should be at least
1.5m² 2 Core & Earth
Installation
panel
Inlet
grille
Upper
cover
Core
structure
Infrared
Sensor
Element
Switch
Thermal
Cut Off
Infrared
Sensor
120cm
108cm
130cm
115cm
140cm
150cm
129cm
160cm
136cm
170cm
143cm
180cm
150cm
122cm
44mm
44mm
1
5
2
m
m
Φ
6mm
Lower Cover