Installation
Method
Mounting Back Plate
•
Drill mounting holes according
to the area that the back plate
is installed in (see
& mount the back plate
Mounting
•
Mount the Hand Dryer onto the
back plate ensuing that the
anti-theft screw holes are
aligned on both the Hand Dryer
and the back plate.
•
Connect the electrical cables
and ensure correct Polarity.
Anti-Theft
•
Screw the anti-theft screw into
the threaded holes to fix the
Hand Dryer to the back plate.
Dai
ly
Us
e
&
Maintenance
External Maintenance:
•
Regularly clean cover with a
soft cloth, do not use harsh
detergents, Acid or Alkali Based
Cleaning products or cleaning
brushes as they may damage
the cover finish.
•
If using a chemically
impregnated cloth
,
please test
on an inconspicuous area prior
to use to check suitability.
Internal Maintenance
•
After turning off the power supply, remove cover and
check all connections,
•
Clean away any dirt that has deposited inside the hand
dryer
and clean the air filter.
•
Remove the motor housing and check the brushes on the
motor for wear.
Replace worn Brushes.
Please note: Brushes are a consumable item and are not
covered under warranty
Method Of Operation:
Insert the back
of your hands
Turn your hands
over
Rub your hands
together until dry
Packing
List
User Manual
Allen Key
ATC
Cub
Hand Dryer 5mm
Plastic wall plug x4 30mm
Self Tapping Screws x4
ATC
CUB HIGHSPEED
Han
d
Dryer
Z-
2651M/BL
•
Attach the air intake grill to the
Hand Dryer making sure it is
securely fastened.
•
Test Hand Dryer
Inlet
grille
Self
tapping
screw
Hook
Hook
groove
Safety
screw
Safety
screw
hole
First Fix
•
A Recessed Junction box
should be installed to allow
hand dryer to sit flush with the
wall.
Overleaf)
