4 USB-HS Serial Converter User
’
s Manual V1.1
Setting Up the RS232 Serial Device
Follow the steps below to connect your RS232 Serial Device (ie: Modem) to the
USB port of your PC:
1. Turn off your Modem. Plug the DB 9 (or DB 25) connector of the USB-HS
Serial Converter into your Modem. Connect the other end of the USB-HS
Serial Converter to an USB type A to type B cable. Turn on the Modem
afterwards.
2. Turn on your computer and plug in the USB connector of the USB-HS Serial
Converter into the USB port.
3. If you have already installed a Modem device before, click Start, Settings,
Modems. Open Modems Properties, select the Modem, click Properties. In
General tab, please change the
Port
value to
USB Serial Port (COM3)
.
4. After finishing these processes, you can use USB to Serial Bridge Cable to
connect RS232 Serial 56K FAX Modem and execute the Dial-up fuction to
connect Internet, and send the FAX with the FAX software(ie: Microsoft FAX)
properly.
Uninstalling the Driver Program