8
Fig PB-1
Fig PB-2
The Alfresco tripod is complete in the box,
remove from the packaging and open the legs
of the tripod to the white line and tighten the
knob.
If the tripod is to be permanently installed, fix
the provided hook into a solid surface and
attach the chain into the hook and tighten.
TRIPOD ASSEMBLY INSTRUCTIONS
Using the standard Alfresco Bracket that comes with the Alfresco Portable
heater (shown in Figure 2 above) attach to the pole bracket using the 4
screws provided.
Fig PB-1
POLE BRACKET ASSEMBLY
With the heater bracket attached, connect the back half of the bracket
to the front with the provided Allen key bolt and dome nut. The bracket
provides 3 fixing locations to accommodate different thickness poles.
If you are using the Alfresco Tripod, use the back hole as shown in
Fig PB-2.
Содержание Alfresco ALH1800
Страница 6: ...6 Fig 2 Fig 1 min 150 mm min 1000mm min 1000mm ...
Страница 7: ...7 min 150 mm min 1000 mm Fig 4 Fig 3 ...
