34
Appendix
My calls cut in and out while I’m using my cordless headset.
X
Other electronic products such as HAM radios and other DECT
phones, can cause interference with your cordless headset.
Try installing your telephone base as far away as possible from
these types of electronic devices.
X
Do not use the headset near a microwave oven. You may
experience decreased performance while the microwave oven
is operating.
X
If your headset is located near a modem, move your headset
and modem further apart from each other.
X
Relocate your telephone base to a higher location. The headset
will have better reception when not installed in a low area.
X
If other phones in your home or office are having the same
problem, the problem is in your wiring or telephone service.
Contact your telephone service provider (charges may apply).
I cannot register the headset.
X
If you want to register this headset to an AT&T DECT 6.0
telephone, make sure the telephone is compatible with this
headset. Visit
https://telephones.att.com/headsets
for a list of compatible telephones.
X
Your telephone has a limitation of the number of headsets that
can be registered to it. If the maximum number of headsets
are already registered, you need to deregister the registered
devices before you can register this headset. Refer to the
user’s manual of the telephone for more details.
The
light on the headset is off while charging.
X
Make sure the power cord is plugged in correctly and securely.
X
Make sure that the battery is securely installed in the
cordless headset.
Troubleshooting
34
