6
Getting started
Handset lifter installation
Connect the headset base
The cords provided with your lifter have colored labels attached
to help you plug them into the headset base. The back of the
headset base has color-coded dots above the jacks, and the
jacks’ names on the rear bottom plastic piece of the headset
base that correspond to the colored labels on the cords (see
Figure 1 below).
You may attach the light blue label to the end of your telephone
curly handset cord that you will plug into the headset base.
If you subscribe to high-speed Internet service (digital subscriber
line - DSL) through your telephone lines, you must install a DSL
filter between the telephone line cord and the telephone wall
jack. The filter prevents noise and caller ID problems caused by
DSL interference. Please contact your DSL service provider for
more information about DSL filters.
Figure 1: Rear view of the headset base connections
Handset
lifter
Power
adapter
Wall
jack
Base
handset
jack
Curly
handset
cord
Blue
Green
Red
Orange
Light blue