background image

Syn248 Installation and Configuration Guide

Back to Contents

System Configuration

49

  

  

  

b. Select the number of 

Seconds before Forwarding

.

7. Set the 

Automatic Off-hook Line Selection

. Users can select and make calls on 

any line assigned to their extension, but if you have a preferred line that you want 
the extension to seize when the user goes off hook, select it here.

8. Select the Intercom Auto Answer 

Delay

. The user can set the Deskset to 

automatically answer Intercom calls after the delay. Without touching the Deskset, 
you can speak to and be heard by the person who called.

If Intercom Auto Answer is enabled on the Deskset, a 

Disable

 button appears, 

allowing you to disable the feature. The user can always enable or disable Intercom 
Auto Answer again.

9. Under 

User Password

, create or change the Deskset password. The password must 

consist of up to 6 digits.

10. Click 

 to save any changes or click 

 to return to the previous page 

without saving the changes.

The Intercom Call Forward–No Answer settings apply to Intercom calls and 
external calls forwarded from a Phone Line Call Forward–No Answer setting 
(including calls routed to the extension by the Auto Attendant).

Содержание Syn248 SB35020





















































































































Отзывы: