Syn248 Installation and Configuration Guide
System Configuration
48
4. You can enter a new extension number in the range 100–999 into the
Change
Extension Number to
box. The first digit of the extension number need not match
the default extension number first digit.
5. You can select
Call Forward/Transfer to Outside Telephone Number
to enable
or disable forwarding or transferring of calls to an external number. This function is
enabled by default and uses two outside lines when calls are forwarded. Disabling
this function prohibits the user from setting the
Call Forward All
target to
Phone #
.
6. Change the
Intercom Call Forward–No Answer Settings
:
a. Select the
Target
for unanswered calls:
Off
. The extension rings until the call is answered or the caller hangs up.
Conference room extensions typically have Call Forward–No Answer Settings
set to
Off
and have their ringers set very low or off.
Voicemail
.
Extension
.
Outside Phone Number
.
Ensure that the extension is not in use and do not assign an extension number
with the first digit of any extension that is the same as an Auto Attendant
menu digit key value, as callers will be unable to dial that extension. Instead,
they will be connected to that Auto Attendant menu action. See
the Auto Attendant” on page 33
.
Desksets do not lose their assigned extensions even if a Deskset is disconnected
and unplugged. If you want to remove a Deskset from the system, the Deskset
must be deleted using the WebUI. (See
.) This
ensures that the extension number becomes available again.
