AT&T SPIRIT 308, Руководство администратора

Страница: 5 / 33

SECTION 1 Customizing
Following is a list and brief description of the features you can change. There are two kinds
of features, SYSTEM FEATURES and TELEPHONE FEATURES. When you customize a system
feature, you have made a change in the whole system. In this manual, information about system
features is always printed with a grey background.
When you customize a telephone feature, the change is made for one telephone extension only.
In this manual, information about telephone features is always printed with a green background.
Description of Features that May be Customized
System Features (instructions for customizing begin on page 11)
■
AUTOMATIC PRIVACY—
This feature prevents others from joining your call without your
permission. If privacy is On, other users in the system must be added to a call through con-
ferencing or a special release of privacy. If privacy is Off, another user can join a telephone
conversation by pressing the line button that the call is on. (Possible settings are On and Off.
Installed setting is On.)
■
TOLL CALL CHECK— If you are in an area that requires a “l” before every toll call, leave this
at the preset value of 1 Required. If your local telephone service does not require a “l” before
dialing a toll call, change the setting to 1 Not Required. If you must dial an access digit in order
to make an outside call, you have PBX or Centrex lines. If you have PBX or Centrex lines, the
SPIRIT
system will not check for a toll call until after the code is dialed. if the PBX/Centrex code
and lines are correctly customized. Calls will be checked only for telephones that have been
customized as Toll Restricted. (Possible settings are 1 Required and 1 Not Required. Installed
setting is 1 Required.)
■
HELD CALLREMINDER— The system can remind a user that a call is on hold. You can set the
number of minutes it will wait before providing the reminder. (Possible settings are Zero for no
reminder, One, Two, Three, or Four Minutes. Installed setting is One Minute.)
■
LINE TYPE— All incoming lines are either PBX/Centrex Lines or direct Outside Lines. If your
system is not at incoming-line capacity you have Unavailable Lines. (For example, if you have
two incoming lines on a system that has three incoming line jacks on the controller, line 3 is
Unavailable).
Find out how many incoming lines you have, and customize Unavailable Lines as
such for proper operation of AUTOMATIC LINE SELECTION. (Possible settings are Unavailable
Line, Outside Line, and PBX/Centrex Line. Installed setting is Outside Line.)
■
PBX/CENTREX LINE ACCESS CODES— If you have PBX/Centrex lines, a code is necessary
to dial an outside call. By entering the code(s) required, you will allow the SPIRIT system to
check for toll calls and automatically insert pauses in SpeedCall numbers on PBX/Centrex lines.
(Up to four one- or two-digit codes may be entered. One code, the digit 9, is already installed for
your convenience, but may be removed or changed.) For further information see page 24.
■
EXTERNAL ALERT— If an optional external alerter (buzzer) is part of your system, you can
set when it will turn on for each line. (Possible settings are Never, Night Only, Day Only, and
Always.
Installed setting is Night Only.) NOTE: Night Only and Day Only are determined by
whether Night Service is on or off (see User Manual).
■
DIAL TYPE— Set each line for the kind of service you have with your local telephone company.
(Possible settings are Touch Tone and Dial Pulse. Installed setting is Dial Pulse).
4 Administration Manual