AT&T SB67070 SIP, Руководство по настройке

Страница: 13 / 16

 exclude a trunk by selecting it, then clicking < Remove. You may want to exclude a
trunk if it is being used for a fax line or a door phone line, for example.
 move a trunk up or down the priority list by selecting it, then clicking

or

.
3. Set the Call Log/Messages Prefix according to your Dialing Rules. You can enter a
maximum of eight digits using only the characters 0–9, #, *, or P. Leave the field blank
if the Dialing Rules do not use a number for external line access.
4. Enter or modify Dialing Rule patterns. For more information, see “About Dialing Rules” in
the Synapse System Administrator’s Guide.
5. Select a Route for each Dialing Rule pattern as required. The list of routes includes all
available trunks in the system, as well as the Default Routing Priority. You can route a
Dialing Rule pattern to use the SIP Gateway only, or to use the Default Routing Priority.
6. Click Apply to save these settings.
Page 13 of 16