manualshive.com logo in svg

AT&T SB3014, Руководство пользователя

Поделиться
Скачать
AT&T SB3014 Скачать руководство пользователя страница 58

Appendix 

54

FCC Part 15

This equipment has been tested and found to comply with the requirements for a Class B 
digital device under Part 15 of the Federal Communications Commission (FCC) rules. These 
requirements are intended to provide reasonable protection against harmful interference in 
a residential installation. This equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver 
is connected.
Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this equipment not expressly approved by the party responsible for 
compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions: (1) this device may not cause harmful interference, and (2) this device must accept 
any interference received, including interference that may cause undesired operation. Privacy of 
communications may not be ensured when using this telephone.

To ensure safety of users, the FCC has established criteria for the amount of radio frequency 
energy that can be safely absorbed by a user or bystander according to the intended usage 
of the product. This product has been tested and found to comply with the FCC criteria. The 
wireless mic may be safely held against the face of the user. The telephone base shall be 
installed and used such that parts of the user’s body other than the hands are maintained at a 
distance of approximately 20 cm (8 inches) or more. 

This Class B digital apparatus complies with Canadian requirement:
CAN ICES-3 (B)/NMB-3(B)

The RBRC® seal

•
•
•

•

The RBRC® Seal means that the manufacturer is voluntarily participating in 
an industry program to collect and recycle lithium-ion rechargeable batteries 
when taken out of service within the United States. These batteries may be 
taken to a participating local retailer of replacement batteries or recycling 
center. Or you may call 

1-800-8-BATTERY®

 for locations accepting spent 

Li-ion batteries.
RBRC® and 1-800-8-BATTERY® are registered trademarks of the Rechargeable 
Battery Recycling Corporation.

Содержание SB3014


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды