AT&T Partner Plus Скачать руководство пользователя страница 78 | Manualshive

Страница: 78 / 87

AT&T Partner Plus Скачать руководство пользователя страница 78

FCC Information

Federal Communications Commission (FCC) Warning Statement

This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of FCC rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manuals, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference, in which case the user will have to correct the

interference at his or her own expense.

FCC Notification and Repair Information

This equipment is registered with the FCC in accordance with Part 68 of its

rules. In compliance with those rules, you are advised of the following:

■

Means of Connection: Connection to the telephone network shall be

through a standard network interface jack USOC RJ11C. These USOCs

must be ordered from your Telephone Company.

This equipment may not be used with party lines or coin telephone lines.

■

Notification to the Telephone Companies: Before connecting this

equipment, you or your equipment supplier must notify your local telephone
company’s business office of the following:

■

The telephone number(s) you will be using with this equipment.

■

The appropriate registration number and ringer equivalence number

(REN), which can be found on the right hand side of the control unit.

■

The facility interface code, which is 02LS2.

FCC Information C-1

«
...
76
77
78
79
80
...
»

Содержание Partner Plus
























































































Отзывы:

Нет отзывов