AT&T OneVision DEFINITY G3 Fault Management and integration, Руководство пользователя

Страница: 135 / 153

Output Options
8-8 Issue 2 April 1996
■
If no, go to step 3.
3. Do you want to change the page length? (The default is 66 lines.)
■
If yes, enter the desired number of lines in the Page Length field.
■
If no, go to step 4.
4. Click on Apply.
5. Did you open the Output Options screen from the Report Builder?
■
If yes, click on Run Report.
■
If no, you have completed this procedure.
Result: Fault Management uses the command that you specified in the
Print Command field to send the report to the printer.
How to Save Reports
To save the report to a file:
1. Click on Output to File.
2. Click on one of the following file formats:
■
ASCII (to save the file for export to another application)
■
Formatted (to use the format that you see when you display the
report)
3. Enter the file’s name in the File Name field. You can enter up to 150
characters.
4. Do you want to append the report to the file in the File Name field?
■
If yes, click on Append.
■
If no, go to step 5.
5. Did you click on Formatted in step 2?
■
If yes, you can change the Page Length field. (Optional)
■
If no, go to step 6.
6. Did you click on ASCII in step 2?
■
If yes, you can change the field delimiter by selecting an item from
the Delimiter field’s pull-down list. (Optional)
■
If no, go to step 7.
7. Click on Apply.
8. Did you open the Output Options screen from the Report Builder?
■
If yes, click on Run Report.
■
If no, you have completed this procedure.