AT&T MERLIN PIus Скачать руководство пользователя страница 46

Страница: 46 / 57

Contents of a Traffic

The traffic analysis report provides the following

Analysis Report

information:

•

R o u t e

The report is detailed by route number (0 through 9).

•

Messages

This field is not relevant to the MERLIN Attendant.

•

Attempted

This field contains the number of times outside callers

have selected a particular route since the last time the
counter was reset to 0. See “Resetting the Counters’”

for details.

•

Completed

This field records the number of times a call was
completed to a particular route.

•

Abandoned before answer

This field indicates the number of caIIs abandoned

before the MERLIN Attendant answered.

•

Abandoned after answer

The number of calls abandoned after the MERLIN

Attendant answers a call but before the call is
processed.

•

Authorized callers

The number of times authorized caller mode was

accessed for programming.

NOTE: If any of the report counters exceed 65,535 total,

the counter is reset to 0.

Connecting the
Printer

To connect the printer, you need the following equipment

•

14-foot, 8-conductor modular cable (straight).

•

Modular/RS-232 DB-25 adapter, male connector or

Modular/RS-232 DB-25 adapter, female connector
(depending on printer model).

Troubleshooting 3 - 5

Содержание MERLIN PIus


























































Результаты поиска

Содержание MERLIN PIus

Отзывы:

AT&T MERLIN PIus, Руководство по установке, Страница: 46 / 57

Результаты поиска

Содержание MERLIN PIus

Отзывы: