AT&T MERLIN LEGEND Release 3.1, Руководство по системному программированию

Страница: 619 / 887

System Features
Programming Procedures
4–247
One-Touch Hold applies to incoming central office calls only. When the user
presses an Auto Dial or DSS button to initiate a transfer, the outside caller is put
on hold. The system automatically selects an intercom facility and dials the
transfer destination. There is no transfer return function with this method.
Consequently, if the transfer destination does not answer or is busy, the user
who initiates the transfer must notify the outside caller, or the outside caller will
remain on hold.
One-Touch Hold is the factory setting in Behind Switch mode only.
Summary: One-Touch Transfer/Hold
Programmable by System manager
Mode All
Idle Condition Not required
Planning Form Form 8a, System Features
Factory Setting One-Touch Transfer, automatic completion (One-Touch
Hold is the factory setting in Behind Switch mode.)
Valid Entries Transfer, Hold
Inspect No
Copy Option No
Console Procedure To program One-Touch Transfer:
Options
®
Transfer
®
One Touch
®
Transfer
®
Enter
®
Manual
or
Automatic
®
Enter
®
Exit
®
Exit
To program One-Touch Hold:
Options
®
Transfer
®
One Touch
®
Hold
®
Enter
®
Exit
®
Exit
PC Procedure To program One-Touch Transfer:
7
®
1
®
2
®
1
®
0
®
1
or
2
®
0®5®5
To program One-Touch Hold:
7
®
1
®
2
®
2
®
0
®
5
®
5
Transfer Audible
Use this procedure to specify whether an outside caller hears ringing (also
called ringback) or Music On Hold while being transferred. Inside callers always
hear ringback during a transfer.