AT&T Merlin Legend MLX-20L Скачать руководство пользователя страница 92

Страница: 92 / 152

Features

To Program Extension Status Buttons

1. Label the buttons to be programmed as

■

E S O f f

■

ES1

■

ES2

NOTE:

The labels suggested refer to the Extension Status
feature used by businesses with housekeeping or
health care services.

ES Off means that the light next to that
extension is off. (Room is occupied and

telephone is in regular call-handling status. )

ES1 means that the light next to that extension
is flashing. (Room is unoccupied and ready for

cleaning; outside calls cannot be made from the
telephone.)
ES2 means that the light next to that extension
is on. (Room is vacant and outside calls cannot
be made from the telephone. )

2. Press Menu.
3. Select

Ext Program [Prog]

If this feature is not displayed, press More.

4. Select

Start.

5. Press the button to be programmed.

4-24

Extension Status

Содержание Merlin Legend MLX-20L

























































































































































Результаты поиска

Содержание Merlin Legend MLX-20L

Отзывы:

AT&T Merlin Legend MLX-20L, Руководство оператора, Страница: 92 / 152

Результаты поиска

Содержание Merlin Legend MLX-20L

Отзывы: