manualshive.com logo in svg

AT&T Merlin Legend BIS10, Руководство пользователя

Поделиться
Скачать
AT&T Merlin Legend BIS10 Скачать руководство пользователя страница 19

Conference Calls

You can set up a conference that includes a combination of

System 25 extensions as well as outside calls. You may have up
to five conferees; however, no more than  two may be on outside
lines.

Setting Up Conference Calls

1 

Dial the first person and announce the conference call.

2  

Press 

and listen for dial tone. 

The light next to the held call blinks intermittently.

3 

Dial the next person you want added to the conference.

NOTE: 

If for any reason this call should  not  be added (busy,

no answer, or misdial): press the switchhook, then the
button associated with the first person; go back to Step 2 and

continue.

4 

Announce the conference call to the added person.

5 

Press the button next to the blinking light to join the calls

together.

6 

For each person you, want to add, go back to Step 3 and

continue the same procedures.

Dropping a Conferee

When you drop someone from the conference, anyone that was

added by  that person is also dropped unless they are on a
Bridged Access or Personal Line button. If you drop the person
who added you to the conference, you will also drop anyone

added to the conference by that person.

1 Press 

2 

Press the button of the person you want to drop.

The light associated with the dropped call goes off.

16

Содержание Merlin Legend BIS10












































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды