Page 2 of 4
Quick Reference Guide For
Merlin II R3 – System Administration
System Type
– Press
System
,
Type
. Press a button for the desired
System Type
:
Square
,
ButnAcc
(Pooled),
ARS
(Pooled),
Dial Acc
(Pooled).
Transfer Return Interval
– Press
More
,
Options
,
TfrRet
. Dial number of rings
(0-9) before a transferred call returns to the originator. Note: 0 rings means transferred
calls will not return to originator.
Line Assignments – Square System
- Press
Stations
,
Line/Pool
. Press the DSS button
for the station being programmed. Press
Enter
. Press line buttons to assign (green light
on) or unassign (green light off) lines. To customize line assignments remove all line
assignments from a station, then press line buttons in the order of desired assignment.
Lines will appear in the order that line buttons were pressed.
Line Assignments – Pooled System
– Press
Stations
,
Line/Pool
. Press the DSS button
for the station being programmed. Press
Enter
. Press line buttons to assign (green light
on) or unassign (green light off) pools. The main pool (dial 9) is automatically assigned
to the 2 line buttons above the
Intercom
buttons. These button assignments
cannot
be
changed.
Assigning Lines To Pools
– Press
Lines
,
Pools
. Dial pool code (9 or 890-899). Press
Enter
. Press line buttons to assign (red light on) or unassign (red light off) lines to pools.
A line can only be assigned to one pool. To change a line’s pool assignment it must first
be removed from its current pool assignment.
System Speed Dial
– Press
More
,
SpdDial
. Dial
System Speed Dial
code (600-729).
Press
Enter
. Press
Bksp
to remove current entry. Dial * to mark the code secret. Dial
telephone number. Press
Enter
. Special dialing characters can be inserted in
System
Speed Dial
numbers as follows:
Pause
= press
Hold
,
Stop
= press
Drop
,
Flash
= press
Recall
, press
Hold
,
Touchtone Enable
= press
Transfer
.
