AT&T Merlin II R3 System administration, Краткое руководство пользователя

Страница: 1 / 4

Page 1 of 4
Quick Reference Guide For
Merlin II R3 – System Administration
System Administration –
Place the administration overlay on the Merlin II display
console. Enter System Administration from station 10 by pulling the switch on the left-
hand side of the Merlin II display console down to ‘P’ and pressing the Conference
button 2 times. The following procedures are performed while in System
Administration mode.
System Administration programming procedures
Attendant Positions
– Press System , Attendnts , Position . Press the DSS button of a
station to assign it as an attendant (green light on). Only every fourth Merlin station jack
may be assigned as an attendant (10, 14, 18, etc.). A max of 8 attendants can be assigned.
Call Restriction – Press Stations , Restrct . Press the DSS button of the station to
restrict. Press Enter . Press a key for the restriction desired; NoRestr = unrestricted,
Local = toll restricted, Intercom = outward restriction.
Group Call Distribution
– Press Stations , More , GrpCall . Dial group number
(870-875). Press Enter . Press the DSS buttons of the stations to assign (green light on).
To associate lines or pools with this group press the line or pool button to assign (green
light on).
Group Page – Press Stations , More , PageZn . Dial group number (881-886). Press
Enter . Press the DSS buttons of the stations to assign (green light on).
Loudspeaker Page – Press More , Options , XtrnPg . Press the line button to be assigned
as the Loudspeaker Page jack (green light on). A line must be unassigned from pools or
any line appearances before it can be assigned to Loudspeaker Page .
Music-On-Hold – Press More , Options , Music . Press the line button to be assigned as
the Music-On-Hold jack (green light on). A line must be unassigned from pools or any
line appearances before it can be assigned to Music-On-Hold .
Recall Timer Interval – Press More , Options , More , More , Recall . Dial number to
specify Recall Timer Interval ; 0 = 350 msec, 1 = 450 msec, 2 = 650 msec, 3 = 1 sec.
Press Enter .
System Renumbering – Press System , More , Renumbr . Wait for system to restart.
This procedure is performed when modules are changed in the control unit.
System Size – Press System , Size . Press Small (8 lines or less and 20 phones or less), or
press Large (more than 8 lines or more than 20 phones).