manualshive.com logo in svg

AT&T MERLIN 820, Руководство по установке, Страница: 37 / 40

Поделиться
Скачать
AT&T MERLIN 820 Скачать руководство пользователя страница 37

TROUBLESHOOTING TABLE (CONTINUED)

Trouble

Possible Cause

Do this

If 

Then

All voice terminals
have no lights and
no dial tone.
(continued)

Switch-controlled
power outlet

2.

3.

4.

Faulty power outlet

A module or car-
tridge is loose

Make sure the control unit is
not plugged into an outlet
controlled by a wall switch.

Test the outlet by plugging in
an appliance such as a lamp
or a radio.

Set the control unit power
switch to Off. Remove and
replace each module and
cartridge, making sure each
is securely seated in its slot.
Set the power switch back to
On.

the control unit is not plugged

go to step 3.

into a switch-controlled outlet

the appliance doesn’t work

the outlet is faulty.

the appliance works

go to step 4.

the red warning light goes out

the problem is solved. One of the
modules or cartridges was not
securely in place.

the red warning light remains on

contact your equipment supplier.

GENERAL TEST

If you are experiencing a problem not described in the previous tests, or if none of the tests reveal a specific problem, try the following procedure before calling your
equipment supplier.

Trouble

Possible Cause

Do this

If 

Then

The system isn’t

The control unit may

1. Set the control unit power

the trouble remains

go to step 2.

working properly and

need to be reset.

switch to Off and then back to

the trouble isn’t

On.

described in the
Troubleshooting

A module or car-

2. Set the control unit power

the trouble remains

contact your equipment supplier.

Table, page 33.

tridge may be loose.

switch to Off. Pull out each
module and cartridge and re-
insert it, so that each module
and cartridge is securely
seated in its slot. Set the
power switch to On.

36

Содержание MERLIN 820









































Отзывы:

Нет отзывов