Western Electric Company for repairs of any other
troubles.
14.
CHECK POINTS
Upon completion of
any
maintenance
work the following steps should be
taken to insure answering set is in
proper operating condition.
(1) Insert power cord into ac outlet. Refer to
Division 514 section entitled: KS-19245, List
1 Telephone Answering Set, Operation, and check
the following:
(a) Announcement recording and erasure
(b) Announcement check:
•
With handset
•
With speaker
(c) Automatic answer-answer and record:
•
Automatic answer ready lamp
•
Ring-up
•
In-use lamp
•
Announcement monitoring in speaker
•
Transfer beep tone
•
Message monitoring in speaker
•
Talk-down tone
•
Voice control-time-out
•
Disconnect beep tone
(d) Automatic answer-answer only:
•
Ring-up
•
Announcement monitoring
in
speaker
•
Disconnect at end of announcement
(e) Message playback:
•
With handset
ISS 3, SECTION 5 14-1 55-300
•
With speaker
•
With earphone (optional accessory)
(f)
Fast forward and rewind of message tape
(g) Erase messages
(h) Foot switch (optional accessory)
(i) Back space unit (optional accessory)
15.
CHART A
Before proceeding with operational
procedure make the following visual
inspection.
VISUAL INSPECTION
15.01
Check connections for type of service.
15.02
Check that plug-in assemblies are properly
installed, with plugs firmly in place:
•
List 2 Recorder
•
List
3
Recorder
•
List 4 Amplifier
•
List 5 Amplifier
•
Relays
•
List 6 Cartridge
15.03
ON-OFF (medallion) lamp lighted. Check
following if otherwise:
•
Function selector-Any position other than
OFF
•
Power cord properly installed
•
Fuse not blown
•
List 6 cartridge properly installed
•
Lamp bulb
15.04
Functions (Preliminary Check)
Page 9
BSP 514-155-300-i03_1975-03-09.jpg Scanned by Frank Harrell, (Cowboy Frank) Castle Rock, Colorado Feb 23, 2012
23:21:00
