5
¥
NOTE:
It is important to connect all devices to this Internet Call Alert
unit using the correct jacks. If you do not connect the devices as described
in these directions, the unit’s lights and Internet Call Waiting feature will not
work properly and the connected devices may not work normally. See
page 6 for installation illustrations.
1
Connect the line cord to the wall jack.
Plug one end of the line cord into the jack labeled
TEL LINE
on
the back of the unit. Plug the other end of this cord into the
modular wall jack, making sure it snaps firmly into place.
2
Connect the unit to your computer modem.
Plug one end of the line cord into the Internet Call Alert unit’s
MODEM
jack. Plug the other end of this cord into your modem’s
jack, making sure it snaps firmly into place.
3
Connect the power cord.
Use only the power adapter provided with this product. To
obtain a replacement, call
1 800 222-3111
.
Plug one end of the power cord into the
POWER
jack on the back
of the unit. Plug the other end into a standard electrical outlet not
controlled by a wall switch.
The screen displays:
4
Connect the unit to a telephone and/or answering machine
(optional).
Plug the telephone’s line cord into the Internet Call Alert unit’s
PHONE
jack. If you are connecting an answering machine, make
sure it is connected between the unit and the telephone.
5
Turn to
FEATURE SET UP
beginning on page 8.
¥
NOTE:
Use with a telephone is optional. However, if you do not connect
a telephone, you will not be able to answer voice calls or use the Display
Dial feature (see “Display Dial” on page 18). If this unit is connected to an
answering system, and if you subscribe to Call Waiting, the Call Waiting
signal may cut off some messages.
WHICH LANGUAGE?
INST
ALLA
TION
INST
ALLA
TION
INSTALLATION
i
0438_CIB_1ATT_012304 1/23/2004 5:21 PM Page 5
