background image

3

B A T T E R I E S

Spare Battery Charger

This phone is equipped with a built-in spare battery
charger in the base unit.  The spare battery charger allows
you to always have a charged battery available should the
handset battery charge become low.

NOTE:  

Do not switch the battery while on a call.

To install the spare battery pack:

(Replacement Battery #3500, SKU# 90817)

1

Open the base unit battery compartment.

2

Place the spare battery pack in the battery compartment.
Make sure the metal contacts on the end of the battery
are aligned with charging contacts in the battery
compartment.

3

Replace the battery compartment cover.

4

When the battery is installed properly, the indicator on
the base unit will light.

5

The spare battery will be fully charged after 16 hours.

NOTE: 

 The indicator on the base will remain lit as long

as there is a spare battery installed in the base.  The light
does not go out when the battery is fully charged.

Power Failure Operation

This phone is capable of supplying back-up power to the
base unit in the event of a power failure.  This feature only
works when the spare battery is installed in the base unit
spare battery charger and is fully charged.  When the
telephone is operating on back-up power, you may only
answer and place calls.

NOTE: 

The amount of time this phone will operate

during a power failure will vary depending on use and
spare battery charge level.

Содержание HS-8500









Отзывы: