Page 15
Page 14
Operational Instructions
Troubleshooting
Remarks:
If troubleshooting does not eliminate the problem,
shut down the headset by pressing and holding the
on the device to reset. Shutting down the headset
resets it to factory default settings and results in the
deletion of all previous settings. In case the problem
still exists, see warranty information on page 18 to
obtain service.
Symptom
Music is not
streaming over
Bluetooth
BTH01 doesn’t
answer phone
calls
Music doesn’t
resume after
hanging up a call
No music control
by BTH01
No power
Solution
Make sure BTH01 is fully
charged.
Make sure your Bluetooth
device has A2DP profile.
Check if both devices are
paired and connected
over Bluetooth.
Restart the BTH01 to
auto-connect with your
Bluetooth device.
Make sure your mobile has
HSP/HFP profile.
Check if both devices are
paired and connected
over Bluetooth.
Restart the BTH01 to
auto-connect with your
Bluetooth device.
Press play to resume
music.
Make sure your Bluetooth
device has AVRCP profile.
LED Light Messages
·
Blue LED light is on:
Powering on
·
Red LED light dims and disappears:
Powering off
·
Red LED light continues to blink:
Low
battery
·
Red LED light stays on:
Recharging
·
Blue LED lights stays on:
Recharging
complete
·
Blue and Red LED lights flash rapidly:
Pairing Mode
·
Blue LED light blinks every two seconds:
Connection complete
·
Blue LED light flashes rapidly:
Receiving
a call
·
Blue LED light repeatedly brightens and
dims:
Talking on the phone/Playing music
Voice Prompt Messages
·
When you turn the headset power on,
voice prompt is “Hello”.
·
When you turn the headset power off,
voice prompt is “Bye”.
·
When pairing is completed, voice prompt is
“Connected”.
·
When the battery reaches less than 20%
capacity, voice prompt is “Battery low”.
·
“Battery low” voice prompt settings;
- At 3.5v = 20% capacity - Once.
- At 3.3v - Every 30 seconds until the
headset powers off.
