AT&T Digital Magic Messenger System, Руководство по эксплуатации

Страница: 11 / 16

AT&T Digital Magic Messenger
Connecting the Magic Messenger to the Line Side of
a Telephone System
1 .
2 .
3 .
Refer to the diagrams below. Locate modular cord “A”, connected
between the first incoming line from the central office and the line
jack on the telephone system. If the connection is not modular,
contact your local AT&T Technical Representative for assistance.
Disconnect the central office end of cord “A” and connect it to the
jack on the Magic Messenger labelled PHONE.
Connect one end of modular cord “B” (included with the Magic
Messenger) to the jack on the Magic Messenger labelled LINE.
Connect the other end to the central office line jack.
*Connect the Magic Messenger during off hours to avoid
interrupting service.
AT&T Digital Magic Messenger
Connecting the Magic Messenger to the Station Side
of a Telephone System
This application allows the Magic Messenger to answer all calls nor-
mally answered at a station.
Note: In this application, the Magic Messenger will only work with a
single-line telephone and from a station port on the telephone system
that can support a single-line telephone and provides forward discon-
nect. If you have questions regarding this application, contact your
AT&T Technical Representative.
Refer to the diagrams below:
Unplug the modular cord at the telephone and plug it into the jack
on the Magic Messenger labelled LINE.
Connect one end of the modular cord included with the MAgic
Messenger to the jack on the Magic Messenger labelled PHONE.
Connect the other end to the single-line telephone.
BEFORE
1.
2.
BEFORE
Line
Central
Telephone
"A"
System
Office Lines
AFTER
P H O N E L I N E
Central
Office Lines
Telephone
"A"
System
"B"
Station Jack (See Note Above)
Telephone System
AFTER
Station Jack
Magic Messenger
Telephone System
PHONE
LINE
Single-line Telephone
11
10