manualshive.com logo in svg

AT&T Digital Announcer, Инструкция по установке и эксплуатации

Поделиться
Скачать
AT&T Digital Announcer Скачать руководство пользователя страница 2

Copyright 1992 AT&T

514-616-100

All rights reserved.

Issue 1

Printed in U.S.A.

July 1992

Notice

The information contained in this document is subject to change
without notice. AT&T assumes no responsibility for any errors that
may appear in this document.

Support Telephone Numbers

AT&T provides a toll-free customer helpline 24 hours a day. In the
U.S. call the AT&T Helpline at 1 800 628-2888 if you need assistance
when using your system. For assistance in Canada, contact your local
AT&T authorized representative.

Trademark Notice

MERLIN LEGEND and Digital Announcer are trademarks of AT&T.
MERLIN, MERLIN II, and DEFINlTY are registered trademarks of
AT&T.
Phillips is a registered trademark of the Phillips Screw Company.

Document Ordering Information

The order number for this book is 514-616-100. To order additional
books, call 1 800 432-6600 in the U.S. and 1 800 255-1242 in
Canada.

Product Ordering Information

The order additional or replacement parts (after warranty), call the
AT&T National Parts Service Center at 1 800 222-7278 in the U.S.
The comcode number for the AT&T Digital Announcer is 406 747 774.
The comoode number for the AT&T Digital Announcer Memory
Upgrade Chip Set  is 406 815 019. The comcode number for the
Power Supply Unit is 406 812 925.

Содержание Digital Announcer
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды