Speaker
[ _ ]
Note:
Your telephone is set for either the Speaker (listen-only) or the Speakerphone
(listen and talk) function. Check with your System Manager to see which of these two
features you can use. You can use the Reset Speakerphone feature only if your
telephone is set for Speakerphone (listen and talk).
Use the following procedures if your telephone is set for the Speaker (listen only)
feature.
To place a call without
lifting the handset, or
to use speaker with
any listening-only
activity (such as,
monitoring a call on
which you have been
put on hold or for
retrieving messages)
Note:
In order for the
other party to hear
you, you must speak
through the handset.
1
2
3
Press
Speaker-Reset Spkr
Place call or access selected feature
Adjust speaker volume if necessary
●
●
To raise the volume, press the right half of the
Volume control button labeled [
▲
]; to lower the
volume, press the left half of the Volume control
button labeled [
▼
]
Display shows [
SPEAKER L >>>> H
] (There are 8
possible volume settings. On the display, 1 arrow is
the lowest setting and 8 arrows is the highest setting)
Note:
If your telephone is set for the Speaker feature, the Mute feature is activated
and the light next to
Mute
goes on whenever you use the speaker.
Pressing
Mute
while you are on a call using the handset affects only the microphone
associated with the handset.
To mute the
1
Press
Mute
microphone associated
●
Red light goes on and other party cannot hear you
with the handset so the
other party cannot hear
2
Press
Mute
again to resume talking to other party
you
through handset
●
Red light goes off and other party can hear you again
To activate the speaker
1 Press
Speaker-Reset Spkr
while using the handset
●
Green light next to
Speaker
and the red light next to
Mute
go on steadily
●
The speaker is active, and the handset is turned off
28
